Precautions: Use in a well ventilated area, protect the floor where the product will be applied, as it will stain. Test a spot on the back of your leather to ensure the color is correct
Surface Prep: Wipe leather with acetone and allow to dry to remove any surface oils and debris.
Instructions: For best results, apply a thin coat of ReLuv directly to the leather with a brush, concentrating on the faded or stained spots first. After the product is applied, take a clean, dry, lint free cloth and dab the ReLuv to create a leather-like texture and remove excess product. Allow ReLuv to dry to the touch between each coat (min 1-2 hours). Continue to apply coats and dab unitl the faded/stained area is thoroughly covered, allowing each coat to dry in between. Once you reach the desired coverage on the affected areas, apply a final coat of ReLuv to the entire piece to ensure that the sheen is the same thoughout. All the leather to cure 24-48 hours before use.
Tips: Use a stippling technique when applying ReLuv to avoid brush strokes. Make sure you apply ReLuv in all grooves, crevices and edges for a professional finish. Recline and furniture that does so to get into any cracks.